PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION 3.0 PDF



Pci Express Card Electromechanical Specification 3.0 Pdf

PCI Express Composter 2.0. PCI Express 3.0's 8 GT/s bit rate effectively delivers 985 MB/s per lane, nearly doubling the lane bandwidth relative to PCI Express 2.0. On November 18, 2010, the PCI Special Interest Group officially published the finalized PCI Express 3.0 specification to its members to build devices based on this new version of PCI Express., PCI Express* 3.0 438-Pin Riser Card Edge Connector 7 Specification Introduction 1 Introduction 1.1 Purpose and Scope This document provides specifications for the PCI Express* 3.0 438-pin riser card edge connector that interfaces with a riser card supporting up to 48 PCIe* lanes at 8 Gbps and power at 12 V, 5 V, and 3.3 V. It contains.

pCI Express Base 3.0 Specification datasheet & applicatoin

kuangying PCI Express card. The PCI Express 4.0 Timetable Preliminary workshop: Primary purpose is test and specification development. Test results are not required to be shared with device vendors. FYI workshop: Vendors receive pass/fail results but no official integrator’s list. At least 2 FYI workshops are run before official compliance testing begins., Catalog Datasheet MFG & Type PDF Document Tags; 2003 - DS200. Abstract: "network interface cards" Text: core is protocol compliant and electrically compatible with the PCI Express Base Specification v1 , compatible with the PCI Express Base Specification v1.0a - · Uses Virtex-II Pro Multi-Gigabit , layers defined by the PCI Express Base Specification v1.0a..

Pci express base specification 2 0 pdf 0 Specification 4MB - This version includes the change bar. Download the PCI Express Base 2. pci express base specification 2.0 pdf 0 GTs data rate and incorporated approved Errata and ECNs. Incorporated Errata for the PCI Express Base Specification, Rev. Questions regarding the PCI Express Base pci express panuganti novels pdf base 3.0 specification revision 1.0 Gen3 Integrated Block for PCIe v4. 0 www.xilinx.com. Compliant with the PCI Express Base Specification, rev. pci express base 3.0 specification 0 CEM Specification with Add-In Cards and Motherboards. Since the painting with light john alton pdf release of the PCIe base

in cards. They are the PCI Express Base Specification (the “Base spec”) and the PCI Express Card Electromechanical Specification (the “CEM spec”). SDA-PCIe-Gen2-OM-E Rev A . 5 • The Base spec. specifically addresses designing a board. The Base spec revision 2.0 introduces several pci express m.2 specification revision 1.0 pdf download. 12 Dec 2013 . M.2 next-generation form factor provides scalable performance for . today announced the release of the PCIe M.2 Specification

10 The PCI Express Specification is organized. the PCI Express Base Specification and the PCI. PCI Local Bus Specification, Revision 3.0 PCI-X. The PCI Expres PCI Express x16 Graphics 150W-ATX Specification Revision 1.0 17. PCI Express 225 W/300 W High Power Card Electromechanical Specification Revision 1.0 18. PCI Express Card Electromechanical Specification Revision 3.0 19. Yun Ling (2008-05-16).

The PCI Express 4.0 Timetable Preliminary workshop: Primary purpose is test and specification development. Test results are not required to be shared with device vendors. FYI workshop: Vendors receive pass/fail results but no official integrator’s list. At least 2 FYI workshops are run before official compliance testing begins. The primary differences between a PCI Express add-in card (as defined by the PCI Express Card Electromechanical Specification) and a PCI Express Mini Card add-in card is a unique card form factor optimized for mobile computing platforms and a card-system interconnection optimized for 10 communication applications. Specifically, PCI Express Mini

PCI Express 4 Lane USB3.0 + SATA III 2+2 port card MODEL NO.: PEU3S3 Features PCI Express Base Specification Rev. 2.0 PCI Express Card Electromechanical Rev. 2.0 Serial ATA AHCI Spec. Rev.1.3 Serial ATA Revision 3.0 One lane PCI Express for 2.5 and 5GHz signaling Single virtual channel PCI Express Card Electromechanical Specification 1.1 and 2.0 (still unreleased) – Addresses Add-in cards for ATX-based desktop applications PCI ExpressMini Card Electromechanical Specification Revision 1.1 – Addresses small card form factor for mobile and communications systems PCI Express ExpressModule™ Electromechanical Specification Revision 1.0 – Latest addition defines removable

The USB 3.0 PCI Express card is compliant to USB 3.0 Standards an d backward compatible with USB 2.0 devices. It also allows you to connect multiple peripherals to your PC at the sam e time. The USB 3.0 PCI Express card enhances the performance of transmission … PCI Express Card Electromechanical Specification 1.1 and 2.0 (still unreleased) – Addresses Add-in cards for ATX-based desktop applications PCI ExpressMini Card Electromechanical Specification Revision 1.1 – Addresses small card form factor for mobile and communications systems PCI Express ExpressModule™ Electromechanical Specification Revision 1.0 – Latest addition defines removable

PCI Express Card Electromechanical Specification Revision 1

Pci express card electromechanical specification 3.0 pdf

AN307 Hardware Design Considerations for PCI ExpressTM. Catalog Datasheet MFG & Type PDF Document Tags; 2003 - DS200. Abstract: "network interface cards" Text: core is protocol compliant and electrically compatible with the PCI Express Base Specification v1 , compatible with the PCI Express Base Specification v1.0a - · Uses Virtex-II Pro Multi-Gigabit , layers defined by the PCI Express Base Specification v1.0a., Pci express base specification 2 0 pdf 0 Specification 4MB - This version includes the change bar. Download the PCI Express Base 2. pci express base specification 2.0 pdf 0 GTs data rate and incorporated approved Errata and ECNs. Incorporated Errata for the PCI Express Base Specification, Rev. Questions regarding the PCI Express Base.

PCI Local Bus Specification

Pci express card electromechanical specification 3.0 pdf

PCI Express ExpressModule Electromechanical Specification. in cards. They are the PCI Express Base Specification (the “Base spec”) and the PCI Express Card Electromechanical Specification (the “CEM spec”). SDA-PCIe-Gen2-OM-E Rev A . 5 • The Base spec. specifically addresses designing a board. The Base spec revision 2.0 introduces several pci express card electromechanical specification, rev. 3.0 6 figures figure 2-2: example current mode reference clock source termination 23 figure 2-3: single-ended ….

Pci express card electromechanical specification 3.0 pdf

  • komposter.com.ua
  • PCI free download. Ebooks library. On-line books store on
  • N5393F/G PCI ExpressВ® 4.0 (Gen4) Electrical Compliance

  • The PCI Express OCuLink Specification allowed the cable assembly to consume the entire budget. The Transmitter and traces routing to the OCuLink connector need some of this budget. The PCI Express Card Electromechanical Specification Revision 3.0 assigns 1.6 ns to the total interconnect lane to lane skew budget. show less The PCI Express OCuLink Specification allowed the cable assembly to consume the entire budget. The Transmitter and traces routing to the OCuLink connector need some of this budget. The PCI Express Card Electromechanical Specification Revision 3.0 assigns 1.6 ns to the total interconnect lane to lane skew budget. show less

    The PCI Express OCuLink Specification allowed the cable assembly to consume the entire budget. The Transmitter and traces routing to the OCuLink connector need some of this budget. The PCI Express Card Electromechanical Specification Revision 3.0 assigns 1.6 ns to the total interconnect lane to lane skew budget. show less in cards. They are the PCI Express Base Specification (the “Base spec”) and the PCI Express Card Electromechanical Specification (the “CEM spec”). SDA-PCIe-Gen2-OM-E Rev A . 5 • The Base spec. specifically addresses designing a board. The Base spec revision 2.0 introduces several

    Future Specifications PCI-SIG members have the opportunity to review and comment on draft specifications and ECNs. The following specifications are currently under Membership Review: PCI Express Retimer Test Specification Revision 4.0, Version 0.9 pci express m.2 specification revision 1.0 pdf download. 12 Dec 2013 . M.2 next-generation form factor provides scalable performance for . today announced the release of the PCIe M.2 Specification

    This PCI Express Card Electromechanical Specification is provided “as is” with no warranties whatsoever, including any warranty of merchantability, noninfringement, fitness for any particular purpose, or any warranty otherwise arising out of any proposal, Detailed M.2 specifications are included in the PCI-SIG M.2 spec; the SATA version of M.2 is described in the SATA v3.2 spec. ! Resolves the performance extensibility issues with mSATA SSD. ! Brings superior throughput capability to “Ultra thin and light” computing, by leaping past the plateau of 6.0 Gbps SATA.

    range of electrical tests as per the PCI Express CEM 3.0, 2.0, 1.1/1.0a electrical specifications for add-in cards and motherboard systems as documented in chapter 4 of the PCIe 3.0 base specification and chapter 4 of the PCIe 3.0 card electromechanical specification. PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 1.1 8 Hot-Plug Insertion and/or removal of a card into an active backplane or system board as defined in PCI Standard Hot-Plug Controller and Subsystem Specification, Revision. 1.0.

    PCI Express 4 Lane USB3.0 + SATA III 2+2 port card MODEL NO.: PEU3S3 Features PCI Express Base Specification Rev. 2.0 PCI Express Card Electromechanical Rev. 2.0 Serial ATA AHCI Spec. Rev.1.3 Serial ATA Revision 3.0 One lane PCI Express for 2.5 and 5GHz signaling Single virtual channel Catalog Datasheet MFG & Type PDF Document Tags; 2003 - DS200. Abstract: "network interface cards" Text: core is protocol compliant and electrically compatible with the PCI Express Base Specification v1 , compatible with the PCI Express Base Specification v1.0a - · Uses Virtex-II Pro Multi-Gigabit , layers defined by the PCI Express Base Specification v1.0a.

    Pci express base specification 2 0 pdf 0 Specification 4MB - This version includes the change bar. Download the PCI Express Base 2. pci express base specification 2.0 pdf 0 GTs data rate and incorporated approved Errata and ECNs. Incorporated Errata for the PCI Express Base Specification, Rev. Questions regarding the PCI Express Base Backward compatible to USB 3.0 and 2.0 Compliant with extensible Host Controller interface specification Revision 1.1 Support Control, Bulk, Stream, Interrupt, Isochronous transfer type PCI Express Gen2 x 2 with clocking speed up to 10Gbps Supports PCI Express® Card Electromechanical Specification Release 2.0

    Pci Express M.2 Specification Revision 1.0 Pdf Download by

    Pci express card electromechanical specification 3.0 pdf

    Pci express base specification 2 0 pdf WordPress.com. pci express m.2 specification revision 1.0 pdf download. 12 Dec 2013 . M.2 next-generation form factor provides scalable performance for . today announced the release of the PCIe M.2 Specification, module cards and supports PCI Express 3.0, USB 3.0, and SATA 3.0 applications. FCI’s PCIe M.2 connectors are also compliant with the PCI-SIG PCIe M.2 specification. The M.2 connector occupies less PCB board space, offers more connector height options, and supports higher data rates than PCIe Mini Card connector. These benefits make it.

    PCI Express 4 Lane USB3.0 + SATA III 2+2 port card

    PCI-SIG Finalizes and Releases PCIe 4.0 Version 1. PCI Local Bus Specification Revision 3.0 August 12, 2002. PCI SPECIFICATIONS VOLUME 1 2 PCI-SIG PCI LOCAL BUS SPECIFICATION, REV. 3.0 REVISION REVISION HISTORY DATE 1.0 Original issue 6/22/92 2.0 Incorporated connector and add-in card specification 4/30/93 2.1 Incorporated clarifications and added 66 MHz chapter 6/1/95 2.2 Incorporated ECNs and improved readability 12/18/98 2.3 …, This document provides PCI Express test procedures for measuring the differential impedance of PCI Express electrical test fixtures and PCI Express product implementations. It is relevant for anyone building add-in cards or system boards to the PCI Express Card Electromechanical Specification ….

    descriptions for all components, this document follows the convention used in the PCI Express Card Electromechanical Specification for uniformity. Because the PCI Express interface is defined as dual-simplex, each connection must consist of both a transmit pair and a receiver pair; meaning that data is sent on one differential pair while descriptions for all components, this document follows the convention used in the PCI Express Card Electromechanical Specification for uniformity. Because the PCI Express interface is defined as dual-simplex, each connection must consist of both a transmit pair and a receiver pair; meaning that data is sent on one differential pair while

    PCI Express card electromechanical specification; Revision 3.0 select a revision file to filter comments PCI_Express_CEM_r3.0_008152013_TS_Clean, Version 1 advanced filtering Subscribe to this discussion. PCI Express card electromechanical specification: Edition Revision 3.0: Corporate author(s) PCI-SIG. Beaverton, OR: Publication Beaverton, OR : PCI-SIG, 2013. - 169 p. Subject category Engineering: Other editions Revision 2.0 (2007)

    range of electrical tests as per the PCI Express CEM 3.0, 2.0, 1.1/1.0a electrical specifications for add-in cards and motherboard systems as documented in chapter 4 of the PCIe 3.0 base specification and chapter 4 of the PCIe 3.0 card electromechanical specification. Спецификация PCI Express 4.0, обеспечившая дву­крат­ный рост по­ло­сы про­пус­ка­ния ши­ны (с 8 до 16 ги­га­транз­ак­ций в се­кун­ду), сре­ди про­чих но­во­вве­де­ний, до­ба­ви­ла в лек­си­кон

    • PCI Express® Card Electromechanical Specification ®• PCI Express Module Electromechanical Specification • For more information on the applicable PCI-SIG specifications, visit www.pcisig.com. • FCI • GS-12-1193 PCI Express® 3.0 Straddle Mount Connector Product Specification ®• GS-12-233 PCI Express Connector Product Specification The primary differences between a PCI Express add-in card (as defined by the PCI Express Card Electromechanical Specification) and a PCI Express Mini Card add-in card is a unique card form factor optimized for mobile computing platforms and a card-system interconnection optimized for 10 communication applications. Specifically, PCI Express Mini

    PCI Express* 3.0 438-Pin Riser Card Edge Connector 7 Specification Introduction 1 Introduction 1.1 Purpose and Scope This document provides specifications for the PCI Express* 3.0 438-pin riser card edge connector that interfaces with a riser card supporting up to 48 PCIe* lanes at 8 Gbps and power at 12 V, 5 V, and 3.3 V. It contains in cards. They are the PCI Express Base Specification (the “Base spec”) and the PCI Express Card Electromechanical Specification (the “CEM spec”). SDA-PCIe-Gen2-OM-E Rev A . 5 • The Base spec. specifically addresses designing a board. The Base spec revision 2.0 introduces several

    PCIe/104 and PCI/104-Express Specification Revision 3.0 February 17, 2015 Page 1 IMPORTANT INFORMATION AND DISCLAIMERS The PC/104 Consortium (“Consortium”) makes no wa rranties with regard to this PCI/104-Express and The USB 3.0 PCI Express card is compliant to USB 3.0 Standards an d backward compatible with USB 2.0 devices. It also allows you to connect multiple peripherals to your PC at the sam e time. The USB 3.0 PCI Express card enhances the performance of transmission …

    Pci Express Card Electromechanical Specification 3 0. These files are related to pci express card electromechanical specification 3 0.Just preview or download the desired file. PCI Express card electromechanical specification; Revision 3.0 select a revision file to filter comments PCI_Express_CEM_r3.0_008152013_TS_Clean, Version 1 advanced filtering Subscribe to this discussion.

    The SF1-STUDIO is provided with two PCI Express® Mini Card host connectors, according to the PCI Express® Mini Card Electromechanical Specification Revision 2.0. These sockets are suitable for PCIe based modules, and also USB 2.0 driven mini cards (option). After inserted, the mini card has to be • PCI Express connector compliant with the specification PCI Express Card Electromechanical Specification version 1.1 , operation in any PCI Express slot (x1, x4, x8, x16) possible • standard version: optionally galvanically isolated low-profile version: galvanically isolated PC CAN Interface User Manual 4.01.0230.20000 3.2 en-US

    • PCI Express® Card Electromechanical Specification ®• PCI Express Module Electromechanical Specification • For more information on the applicable PCI-SIG specifications, visit www.pcisig.com. • FCI • GS-12-1193 PCI Express® 3.0 Straddle Mount Connector Product Specification ®• GS-12-233 PCI Express Connector Product Specification PCI LOCAL BUS SPECIFICATION, REV. 3.0 2 REVISION REVISION HISTORY DATE 1.0 Original issue. 6/22/92 2.0 Incorporated connector and add-in card specification. PCI Express™ Card Electromechanical Specification

    PCI Express 4 Lane USB3.0 + SATA III 2+2 port card MODEL NO.: PEU3S3 Features PCI Express Base Specification Rev. 2.0 PCI Express Card Electromechanical Rev. 2.0 Serial ATA AHCI Spec. Rev.1.3 Serial ATA Revision 3.0 One lane PCI Express for 2.5 and 5GHz signaling Single virtual channel range of electrical tests as per the PCI Express CEM 3.0, 2.0, 1.1/1.0a electrical specifications for add-in cards and motherboard systems as documented in chapter 4 of the PCIe 3.0 base specification and chapter 4 of the PCIe 3.0 card electromechanical specification.

    This PCI Express Card Electromechanical Specification is provided “as is” with no warranties whatsoever, including any warranty of merchantability, noninfringement, fitness for any particular purpose, or any warranty otherwise arising out of any proposal, Revision 2.2 vi Chapter 4 Electrical Specification 4.1. Overview.. 113

    Спецификация PCI Express 4.0, обеспечившая дву­крат­ный рост по­ло­сы про­пус­ка­ния ши­ны (с 8 до 16 ги­га­транз­ак­ций в се­кун­ду), сре­ди про­чих но­во­вве­де­ний, до­ба­ви­ла в лек­си­кон pci express m.2 specification revision 1.0 pdf download. 12 Dec 2013 . M.2 next-generation form factor provides scalable performance for . today announced the release of the PCIe M.2 Specification

    Pcie base specification 3 0 pdf WordPress.com

    Pci express card electromechanical specification 3.0 pdf

    Specifications PCI-SIG. Pci Express Card Electromechanical Specification 3 0. These files are related to pci express card electromechanical specification 3 0.Just preview or download the desired file., PCI Express card electromechanical specification; Revision 3.0 select a revision file to filter comments PCI_Express_CEM_r3.0_008152013_TS_Clean, Version 1 advanced filtering Subscribe to this discussion..

    AN307 Hardware Design Considerations for PCI ExpressTM

    Pci express card electromechanical specification 3.0 pdf

    Specifications PCI-SIG. The PCI Express 4.0 Timetable Preliminary workshop: Primary purpose is test and specification development. Test results are not required to be shared with device vendors. FYI workshop: Vendors receive pass/fail results but no official integrator’s list. At least 2 FYI workshops are run before official compliance testing begins. pci express card electromechanical specification, rev. 3.0 6 figures figure 2-2: example current mode reference clock source termination 23 figure 2-3: single-ended ….

    Pci express card electromechanical specification 3.0 pdf


    PCI Express 3.0's 8 GT/s bit rate effectively delivers 985 MB/s per lane, nearly doubling the lane bandwidth relative to PCI Express 2.0. On November 18, 2010, the PCI Special Interest Group officially published the finalized PCI Express 3.0 specification to its members to build devices based on this new version of PCI Express. pci express panuganti novels pdf base 3.0 specification revision 1.0 Gen3 Integrated Block for PCIe v4. 0 www.xilinx.com. Compliant with the PCI Express Base Specification, rev. pci express base 3.0 specification 0 CEM Specification with Add-In Cards and Motherboards. Since the painting with light john alton pdf release of the PCIe base

    PCI Local Bus Specification Revision 3.0 August 12, 2002. PCI SPECIFICATIONS VOLUME 1 2 PCI-SIG PCI LOCAL BUS SPECIFICATION, REV. 3.0 REVISION REVISION HISTORY DATE 1.0 Original issue 6/22/92 2.0 Incorporated connector and add-in card specification 4/30/93 2.1 Incorporated clarifications and added 66 MHz chapter 6/1/95 2.2 Incorporated ECNs and improved readability 12/18/98 2.3 … 10 The PCI Express Specification is organized. the PCI Express Base Specification and the PCI. PCI Local Bus Specification, Revision 3.0 PCI-X. The PCI Expres

    Спецификация PCI Express 4.0, обеспечившая дву­крат­ный рост по­ло­сы про­пус­ка­ния ши­ны (с 8 до 16 ги­га­транз­ак­ций в се­кун­ду), сре­ди про­чих но­во­вве­де­ний, до­ба­ви­ла в лек­си­кон This PCI Express Base Specification is provided “as is” with no warranties whatsoever, including any warranty of merchantability, noninfringement, fitness for any particular purpose, or any warranty otherwise arising out of any

    Product description. The USB 3.0 PCI Express card upgrades your desktop computer with two USB 3.0 ports. SuperSpeed USB 3.0 is the new standard for peripheral interface and provides a data transfer rate of up to 5 Gbps, 10 times faster than USB 2.0. PCI Express Card Electromechanical Specification 1.1 and 2.0 (still unreleased) – Addresses Add-in cards for ATX-based desktop applications PCI ExpressMini Card Electromechanical Specification Revision 1.1 – Addresses small card form factor for mobile and communications systems PCI Express ExpressModule™ Electromechanical Specification Revision 1.0 – Latest addition defines removable

    PCI Express 4 Lane USB3.0 + SATA III 2+2 port card MODEL NO.: PEU3S3 Features PCI Express Base Specification Rev. 2.0 PCI Express Card Electromechanical Rev. 2.0 Serial ATA AHCI Spec. Rev.1.3 Serial ATA Revision 3.0 One lane PCI Express for 2.5 and 5GHz signaling Single virtual channel PCIe/104 and PCI/104-Express Specification Revision 3.0 February 17, 2015 Page 1 IMPORTANT INFORMATION AND DISCLAIMERS The PC/104 Consortium (“Consortium”) makes no wa rranties with regard to this PCI/104-Express and

    PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 1.1 8 Hot-Plug Insertion and/or removal of a card into an active backplane or system board as defined in PCI Standard Hot-Plug Controller and Subsystem Specification, Revision. 1.0. PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 1.1 8 Hot-Plug Insertion and/or removal of a card into an active backplane or system board as defined in PCI Standard Hot-Plug Controller and Subsystem Specification, Revision. 1.0.

    This PCI Express Card Electromechanical Specification is provided “as is” with no warranties whatsoever, including any warranty of merchantability, noninfringement, fitness for any particular purpose, or any warranty otherwise arising out of any proposal, in cards. They are the PCI Express Base Specification (the “Base spec”) and the PCI Express Card Electromechanical Specification (the “CEM spec”). SDA-PCIe-Gen2-OM-E Rev A . 5 • The Base spec. specifically addresses designing a board. The Base spec revision 2.0 introduces several

    PCI LOCAL BUS SPECIFICATION, REV. 3.0 2 REVISION REVISION HISTORY DATE 1.0 Original issue. 6/22/92 2.0 Incorporated connector and add-in card specification. PCI Express™ Card Electromechanical Specification PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 1.1 8 Hot-Plug Insertion and/or removal of a card into an active backplane or system board as defined in PCI Standard Hot-Plug Controller and Subsystem Specification, Revision. 1.0.

    The PCI Express OCuLink Specification allowed the cable assembly to consume the entire budget. The Transmitter and traces routing to the OCuLink connector need some of this budget. The PCI Express Card Electromechanical Specification Revision 3.0 assigns 1.6 ns to the total interconnect lane to lane skew budget. show less 10 The PCI Express Specification is organized. the PCI Express Base Specification and the PCI. PCI Local Bus Specification, Revision 3.0 PCI-X. The PCI Expres

    PCI Express x16 Graphics 150W-ATX Specification Revision 1.0 17. PCI Express 225 W/300 W High Power Card Electromechanical Specification Revision 1.0 18. PCI Express Card Electromechanical Specification Revision 3.0 19. Yun Ling (2008-05-16). • PCI Express® Card Electromechanical Specification ®• PCI Express Module Electromechanical Specification • For more information on the applicable PCI-SIG specifications, visit www.pcisig.com. • FCI • GS-12-1193 PCI Express® 3.0 Straddle Mount Connector Product Specification ®• GS-12-233 PCI Express Connector Product Specification

    PCI Local Bus Specification Revision 3.0 August 12, 2002. PCI SPECIFICATIONS VOLUME 1 2 PCI-SIG PCI LOCAL BUS SPECIFICATION, REV. 3.0 REVISION REVISION HISTORY DATE 1.0 Original issue 6/22/92 2.0 Incorporated connector and add-in card specification 4/30/93 2.1 Incorporated clarifications and added 66 MHz chapter 6/1/95 2.2 Incorporated ECNs and improved readability 12/18/98 2.3 … Detailed M.2 specifications are included in the PCI-SIG M.2 spec; the SATA version of M.2 is described in the SATA v3.2 spec. ! Resolves the performance extensibility issues with mSATA SSD. ! Brings superior throughput capability to “Ultra thin and light” computing, by leaping past the plateau of 6.0 Gbps SATA.

    PCI Express 4 Lane USB3.0 + SATA III 2+2 port card MODEL NO.: PEU3S3 Features PCI Express Base Specification Rev. 2.0 PCI Express Card Electromechanical Rev. 2.0 Serial ATA AHCI Spec. Rev.1.3 Serial ATA Revision 3.0 One lane PCI Express for 2.5 and 5GHz signaling Single virtual channel PCI Express ® Base Specification Revision 3.0 November 10, 2010 PCI Express® Card Electromechanical Specification Revision 3.0 ver. 0.9 April 13, 2011 PCI Express® Architecture PHY Test Specification Revision 3.0 ver. 0.5 November 26, 2010 Card Electromechanical (CEM) Specification (0.9) Developed by: Electro-Mechanical work group Base

    • PCI Express® Card Electromechanical Specification ®• PCI Express Module Electromechanical Specification • For more information on the applicable PCI-SIG specifications, visit www.pcisig.com. • FCI • GS-12-1193 PCI Express® 3.0 Straddle Mount Connector Product Specification ®• GS-12-233 PCI Express Connector Product Specification This week, PCI-standards consortium PCI-SIG (Special Interest Group) has ratified and released specifications for PCIe 4.0 Specification Version 1, uploading the documents to their PCI-SIG

    descriptions for all components, this document follows the convention used in the PCI Express Card Electromechanical Specification for uniformity. Because the PCI Express interface is defined as dual-simplex, each connection must consist of both a transmit pair and a receiver pair; meaning that data is sent on one differential pair while Detailed M.2 specifications are included in the PCI-SIG M.2 spec; the SATA version of M.2 is described in the SATA v3.2 spec. ! Resolves the performance extensibility issues with mSATA SSD. ! Brings superior throughput capability to “Ultra thin and light” computing, by leaping past the plateau of 6.0 Gbps SATA.